Computrol X-Line2017-10-30T16:42:21+08:00
DDC Controllers
The Computrols X-line controller has become the staple product of our HVAC controller line. These powerful controllers provide endless flexibility. Each X-line control board is equipped with Universal points, additionally, each X-line control board is equipped with 2 rs-485 communication ports. These ports can be configured to communicate several protocols including, but not limited to:
» BACnet
» Modbus
» N2 (Johnson Controls)
» FLN (Siemens, Floor Level Network)
As with all Computrols products, Computrols offers a lifetime warranty on our HVAC controllers. These controllers are designed and manufactured at our corporate headquarters in Harvey, LA, enabling our team to assure the highest level of quality control.
Go to top
  • 8X (8 Point Controller) »

Introduction

When it comes to controlling large heating, ventilation, and air-conditioning systems, our Professional line of controllers are the best in the business. For applications requiring eight points or less, our 8X controller is the right choice.

Highlights

4-in-1 Points Any point can be configured through software to be Analog In, Analog Out, Binary In, or Binary Out – no jumpers.
Large Screw Terminals No special screwdrivers – simple secure terminations.
Status Indicators Bright on-board LEDs assist in troubleshooting.
On-Board Web Server Directly connect a normal web browser for simple management.
10 Mbps Ethernet Port High-speed communications allow the ultimate in flexibility and snappy response.
Easily Addressable 3 decimal rotary switches (0-9) allow simple addressing – no hex, no binary.
UL Listed A mature product which meets industry standard requirements.
Two-Board Design All of the electronics are on one easily replaceable brain board for quick repairs.
Lifetime Warranty Our quality speaks for itself.
Go to top

Parts & Accessories

PART NUMBER DESCRIPTION
8X 8 binary or analogue points. The controller only – enclosure and transformer required.
8X-NEMA1 8X controller mounted in NEMA 1 indoor enclosure with a transformer.
8X-NEMA4X 8X controller mounted in NEMA 4X outdoor enclosure with a transformer.
HHT Hand Held Terminal
ST-D3-XH 10K type duct temperature sensor
ST-S3E 10K type space temperature sensor
ST-S3E-XA 10K type space temperature sensor with setpoint adjustment.
MN-S3-700 LCD room temperature sensor (200 feet maximum distance from the controller).
Note: requires stat interface board STAT–IFC.
MN-S3HT Space temperature and humidity sensor. Note: requires stat interface board STAT–IFC.
SI-S3 Stat interface board
T-PB202-0 4.0 amp power supply with 120 Vac outlet.
VMD2B-F24D VMD series 24Vdc relay switch with override switch.
DCM24-44, DM24-53, DM24-280 Direct coupled actuators. Part numbers indicate torque ratings.
VP1 VTP voltage pressure transducer ( 3-15 PSI )
PV3 Differential pressure transmitter (Specify 0-1”, 0-2” or 0-5” W.C.)
H-922 Analog current sensor
H8035/8036 Series 3 phase networked (MODBUS RTU) KW/KWH power meter
Go to top
  • 16X (16 Point Controller) »

Highlights

4-in-1 Points Any point can be configured through software to be Analog In, Analog Out, Binary In, or Binary Out – no jumpers.
Large Screw Terminals No special screwdrivers – simple secure terminations.
Status Indicators Bright on-board LEDs assist in troubleshooting.
On-Board Web Server Directly connect a normal web browser for simple management.
10 Mbps Ethernet Port High-speed communications allow the ultimate in flexibility and snappy response.
Easily Addressable 3 decimal rotary switches (0-9) allow simple addressing – no hex, no binary.
UL Listed A mature product which meets industry standard requirements.
Two-Board Design All of the electronics are on one easily replaceable brain board for quick repairs.
Lifetime Warranty Our quality speaks for itself.
Go to top

Tech Specs

Software Compatibility Works with all versions of CBAS: Professional, Commercial, and Utility.
Power Requirements 40VA @ 24 Vac 50/60 Hz Class 2 transformer
Point Configuration All points software configurable as analog inputs, binary inputs, analog outputs, or binary outputs.
Analog Output Specifcations 0-10 Vdc voltage type
Binary Output Specifications 24 Vdc @ 50 mA
Analog Input Specifications 10K Ohm TYPE III thermistor
0-10 Vdc
4-20 mA
0-32K Ohm resistive (scalable)
Binary Input Specifications Dry contact – switch closure
Pulse dry contact 5Hz max repetition rate, 100 msec (min) pulse width
Voltage Protection 250 Vac on each point terminal
Electrical Connection Barrier terminal block 18 -24 AWG
24 Vdc loop source terminals (1.28 Amps maximum)
Internet Capability IP addressable on-board web server
Communication Ports 10 Mbps RJ-45 Ethernet TCP/IP, 100-meter maximum distance
One RS485 CBAS communication 9600 Baud
One RS485 interface port 9600 Baud
Local handheld terminal
Microprocessor Intel 386 25 MHz, 3 MB Flash, 1MB SRAM 2K NVRAM
Real-time clock with 10-year data retention
Dimensions 6.5” W x 10.375” L x 1.25” H

32X (32 Point Controller) »X-line-32X-Controller

64X (64 Point Controller) »X-line-64X-Controller

 

Go to top

Datasheets

X-line-8X-Controller
For applications requiring only 8 points or less, our 8X controller is the right choice.

X-line-16X-Controller
Our 16X provides a nice fit for air handler and similar applications that require up to 16 points.

X-line-32X-Controller
The 32X provides the best solution for large air handlers and other equipment requiring up to 32 points.

X-line-64X-Controller
For the largest equipment and central plant automation, the 64X meets the challenge.

X-line-CBAS_Datasheet
CBAS, the simplest building automation system software to install, program, maintain and operate. CBAS software is capable of seamlessly integrating with various manufacturers’ field controllers.

Go to Top